039 976 0065
“Specialists in all Construction Services”
Cell: 082 467 5657
Tel: 039 976 0065
Quick Links
Home
About Us
Industrial Services
Contact Us
C e i l i n g s | C e i l i n g C o r n i c e s | I s o b o a r d | P a i n t s D e p a r t m e n t
CEILING & CORNICE SHOP
We offer a wide range of building material and decor to suit all your renovation needs. We supply a wide variety of paints, ceilings, plumbing and diy products.
We have our own professional in-house paint doctor that will mix any colour you prefer using a wide variety of colour charts.
PVC CEILINGS
10 in a pack
Insulation
Battens (spacing 300mm)
Drywall screws
Width: 300mm
Coverage: 11m²
CEILING TILES, ROSES & DADO RAILS
Ceiling Tiles: 50cmx50cm
8 in a pack (covers 2m²)
Ceiling Roses:
Various designs to choose from
Dado Rails: 2.4m lenghts
ISOBOARD
Thickness: 30mm, 40mm, 50mm
Stock Lengths: 2m, 2.4m, 2.7m, 3m, 3.6m, 4m,
4.8m, 5.4m, 6m, 7.2m, 8m.
80mm only available in 2m lenghts
Width: 600mm
Board Finish: plain/bevelled/isopine to be painted
with acrylic pva paint.
CEILINGS
RHINOBOARD
7mm, 9mm and 12mm
Rhinolite / Rhinoglide, fibre tape 45mm or 90mm,
tracks, studs, wall & ceiling channel, aluminium
skirting.
Moisture board 12mmx1.2x2.7/3/3.6m
Shera/Nutec boards 6mmx1.2x3m
Shera screws
Shutterply 18mmx1.2x2.4 (a grade/b grade)
TRAP DOORS
600mm x 600mm in width
INSULATION
Isotherm - 50mmx1.2 (12m²) 100mmx1.2 (7.2²)
Alucushion - 40mx1.2 (50m²)
Sisalation fr430 - 40mx1250 (50m²)
Ultra Sonic Batt (sound control) - 50mmx1195x595
(10 Batts in a pack)
Cavity Batt - 51mmx1.2x600 (40 batts)
63mmx1.2x600 (30 batts) 100mmx1.2x600 (20
batts)
Acoustic Batt - 51mmx1.2x600 (20 batts)
63mmx1.2x600 (16 batts) 100mmx1.2x600 (12
batts)
SUSPENDED CEILINGS
Cross Tee 1.2 (galv/white)
Main Tee 3.6 (galv/white)
Shadow Line 3.6 white (20x20)
White Vinyl Ceiling Tiles (9mm x 1.2 x 600)
Acoustic Tiles 1.2 x 600
Hanger Straps
BATTENS
Steel battens 3m
Steel battens 3.6m
Suspension brackets
Joiners for battens
Timber battens 38x38 (3m/3.6m/4.2m/4.8m/6m)
Timber rafters 38x114 (4.2m/6m)
Timber purlins 50x76 (3m/6m)
EXTRAS
Screws: drywall, jetting, chipboard, roofing screws,
wafer tek.
Nails: 3'', 4'', 5'', clout nails, 75mm steel nails, panel
pins, masonary nails, tite grip.
Corner bead 2.7m
Wall angle white 3.6m
Wall angle galv 20x20x3.6m
Wall angle galv 25x25x3.6m
Shadowline 30x30x3.6m
Glue: 280ml, 1kg, 2kg, 5kg
PROFILE: CS16
Size: 65mm
CORNICES
Here are 48 different cornice profiles to choose from.
PROFILE: XPS 008
Size: 100mm
PROFILE: XPS 009
Size: 50mm
PROFILE: XPS 006
Size: 40mm
PROFILE: CS41
Size: 105mm
PROFILE: XPS 004
Size: 62mm
PROFILE: XPS 005
Size: 95mm
PROFILE: CS05
Size: 105mm
PROFILE: CS20
Size: 107mm
PROFILE: CS45
Size: 175mm
PROFILE CS10
Size: 105mm
PROFILE: CS21
Size:135mm
PROFILE: XPS 001
Size: 130mm
PROFILE: CS42
Size: 110mm
PROFILE: CS43
SIZE: 120MM
PROFILE: XPS003
Size: 135mm
PROFILE: CS23
Size: 130MM
PROFILE: CS46
Size: 135mm
PROFILE: CS47
Size: 125mm
PROFILE: CS48
Size: 135mm
PROFILE: CS12
Size: 133mm
PROFILE: CUBA
Size: 72mm
PROFILE: COVE90
Size: 84mm
PROFILE: COVE80
Size: 80mm
PROFILE: CS08
Size: 120mm
PROFILE: COVE40
Size: 50mm
PROFILE: P6
Size: 135mm
PROFILE: CS44
Size: 140mm
PROFILE: P13
Size: 100mm
PROFILE: CS04
Size: 135mm
PROFILE: CS22
Size: 100mm
PROFILE: CS40
Size: 190mm
PROFILE: CS07
Size: 175mm
PROFILE: CS18
Size: 140mm
PROFILE: CS106
Size: 59mm
PROFILE: CS25
Size: 104mm
ALL ABOUT CORNICES
Cornices are the narrow mouldings that you see capping the lines where the walls of a room meet the ceiling. Traditionally, they were made from wood, plaster,
paper-covered plaster, polyurethane, and nowadays, they are made from polystyrene. Cornices and other mouldings were made exclusively from wood,
but polystyrene has now emerged as a leading favourite because they are cost effective and easy to install.
The fact that the installation of polystyrene cornices is a really simple process it’s probably the number one reason why they are so popular. Since polystyrene
cornices are installed using special adhesive glue, they can be successfully mounted onto a whole host of different surfaces, including
concrete, wood, face brick, marble, tile, vinyl, steel, granite and plastic, to name just a few.
Polystyrene cornices have a smooth, white surface, which merges exceptionally well with white ceilings. To paint them, all you need to do is to apply a single
coat of white water-based paint. This is much quicker and easier when compared to painting other cornice materials, which often require an undercoat,
and then 2 to 3 coats of paint. To make it even quicker, you can opt to spray paint a quick coat of paint onto your polystyrene cornices.
WHAT YOU WILL NEED TO INSTALL CORNICES:
MITER BOX
SCRAPER
CORNICE GLUE
SILICONE GUN
OVER TRUSS/ RAFTER
One of the most cost-effective insulated ceilings is
to install IsoBoard as a roof-liner over trusses,
beams and rafters.
The board, in addition to providing high levels of
thermal insulation, provides a beautiful backdrop to
exposed trusses, and can be painted to match as
required.
NAIL UP CEILINGS
Can be retrofitted below an existing ceiling to cover
damage, provide insulation or change the
appearance. Isoboard can also be fixed below
concrete soffit.
BETWEEN TRUSS/RAFTER
The beauty of the timber can be exposed, whether
raw, treated or painted, with the thermal insulation
providing a supporting and accentuating backdrop as
well as proven and enduring thermal comfort. The
IsoBoard can also be painted or stained to match
each specific requirement.
ISOBOARD
Isoboard is a rigid, high density, extruded polystyrene, manufactured in different thicknesses and lengths to meet almost any building thermal insulation
requirements in the temperature range -30°c to +60°c.
Thermal insulation provides a barrier to heat transfer, which keeps heat energy on one side of the board or the other. Isoboard can be painted with water
based paints when used in exposed applications.
Exposed to fire, isoboard shrinks away from the heat source. There are no flaming droplets, and no flame spread. The gases released as a product of combustion
are less toxic than burning wood. Isoboard thermal insulation is available in standard lengths from 1.8m to 8m and in 600mm increments.
Thicknesses range from 30mm, 40mm, 50mm and 80mm.
INVERTED ROOF
Inverted roofs are designed with the waterproofing
layer, usually a liquid-applied membrane, beneath the
insulation. Insulation boards are loose-laid on top of
the membrane and then weighed down with paving
slabs or gravel ballast.
BETWEEN CAVITY WALL
Cavity wall insulation will prevent heat transfer and
build-up to the inner leaf of sun exposed walls.
UNDER SOFFIT
The requirement for insulation is met by fixing
IsoBoard to the under soffit surface of the slab as a
ceiling.
PERIMETER WALL
Isoboard is inserted against the foundations of the
building on the outside from the surface to the depth
of the foundation or 600mm, whichever is greater.
UNDER FLOOR
Loss of heat through floors on concrete surface beds
is experienced as a cold underfoot condition,
particularly during winter when the supporting soils
cool down due to hygroscopic action of water.
WHAT YOU NEED TO INSTALL ISOBOARD
DRYWALL
SCREWS
CEILING
CLIPS
STEEL OR TIMBER
BATTENS
WASHERS
CORNICE
GLUE
HOUSE PAINTS
Duram, Dulux, Plascon, Excelsior, Prodec.
Exterior/interior, wall & ceiling, primer, varnish, road marking.
PAINTS DEPARTMENT
In our paints department we don’t just stock paint, we also mix any colour you would need for your diy project. Interior and exterior paints,
wall and ceiling, enamel, varnish, road marking paint and roof paints
ROOF PAINTS
Duram, Abe, Sika, Powafix.
Roof paint, waterproofing roofpaint with fibre reinforced and without,
acrylic waterproofing, hydroproof.
PAINT TINTING
Plascon and Duram paint tinting.
EXTRAS
Wood glue, epoxy adhesive, sealing/bonding, bonding agent, silicone,
contact glue, wood filler, paint tinter, lacquer thinners, mineral
turpentine, methylated spirits, spraypaint, lube spray, skim fix, crack
filler, sandpaper, paint brush, rollers, masking tape, scrapers.
PVC CEILINGS
10 in a pack
Insulation
Battens (spacing 300mm)
Drywall screws
Width: 300mm
Coverage: 11m²
CEILING TILES, ROSES & DADO RAILS
Ceiling Tiles: 50cmx50cm
8 in a pack (covers 2m²)
Ceiling Roses:
Various designs to choose from
Dado Rails: 2.4m lenghts
ISOBOARD
Thickness: 30mm, 40mm, 50mm
Stock Lengths: 2m, 2.4m, 2.7m, 3m, 3.6m, 4m,
4.8m, 5.4m, 6m, 7.2m, 8m.
80mm only available in 2m lenghts
Width: 600mm
Board Finish: plain/bevelled/isopine to be painted
with acrylic pva paint.
RHINOBOARD
7mm, 9mm and 12mm
Rhinolite / Rhinoglide, fibre tape 45mm or 90mm,
tracks, studs, wall & ceiling channel, aluminium
skirting.
Moisture board 12mmx1.2x2.7/3/3.6m
Shera/Nutec boards 6mmx1.2x3m
Shera screws
Shutterply 18mmx1.2x2.4 (a grade/b grade)
TRAP DOORS
600mm x 600mm in width
INSULATION
Isotherm - 50mmx1.2 (12m²) 100mmx1.2 (7.2²)
Alucushion - 40mx1.2 (50m²)
Sisalation fr430 - 40mx1250 (50m²)
Ultra Sonic Batt (sound control) - 50mmx1195x595
(10 Batts in a pack)
Cavity Batt - 51mmx1.2x600 (40 batts)
63mmx1.2x600 (30 batts) 100mmx1.2x600 (20
batts)
Acoustic Batt - 51mmx1.2x600 (20 batts)
63mmx1.2x600 (16 batts) 100mmx1.2x600 (12
batts)
SUSPENDED CEILINGS
Cross Tee 1.2 (galv/white)
Main Tee 3.6 (galv/white)
Shadow Line 3.6 white (20x20)
White Vinyl Ceiling Tiles (9mm x 1.2 x 600)
Acoustic Tiles 1.2 x 600
Hanger Straps
BATTENS
Steel battens 3m
Steel battens 3.6m
Suspension brackets
Joiners for battens
Timber battens 38x38 (3m/3.6m/4.2m/4.8m/6m)
Timber rafters 38x114 (4.2m/6m)
Timber purlins 50x76 (3m/6m)
EXTRAS
Screws: drywall, jetting, chipboard, roofing screws,
wafer tek.
Nails: 3'', 4'', 5'', clout nails, 75mm steel nails, panel
pins, masonary nails, tite grip.
Corner bead 2.7m
Wall angle white 3.6m
Wall angle galv 20x20x3.6m
Wall angle galv 25x25x3.6m
Shadowline 30x30x3.6m
Glue: 280ml, 1kg, 2kg, 5kg
PROFILE: CS16
Size: 65mm
CORNICES
Here are 48 different cornice profiles to choose from.
PROFILE: XPS 008
Size: 100mm
PROFILE: XPS 009
Size: 50mm
PROFILE: XPS 006
Size: 40mm
PROFILE: CS41
Size: 105mm
PROFILE: XPS 004
Size: 62mm
PROFILE: XPS 005
Size: 95mm
PROFILE: CS05
Size: 105mm
PROFILE: CS20
Size: 107mm
PROFILE: CS45
Size: 175mm
PROFILE CS10
Size: 105mm
PROFILE: CS21
Size:135mm
PROFILE: XPS 001
Size: 130mm
PROFILE: CS42
Size: 110mm
PROFILE: CS43
SIZE: 120MM
PROFILE: XPS003
Size: 135mm
PROFILE: CS23
Size: 130MM
PROFILE: CS46
Size: 135mm
PROFILE: CS47
Size: 125mm
PROFILE: CS48
Size: 135mm
PROFILE: CS12
Size: 133mm
PROFILE: CUBA
Size: 72mm
PROFILE: COVE90
Size: 84mm
PROFILE: COVE80
Size: 80mm
PROFILE: CS08
Size: 120mm
PROFILE: COVE40
Size: 50mm
PROFILE: P6
Size: 135mm
PROFILE: CS44
Size: 140mm
PROFILE: P13
Size: 100mm
PROFILE: CS04
Size: 135mm
PROFILE: CS22
Size: 100mm
PROFILE: CS40
Size: 190mm
PROFILE: CS07
Size: 175mm
PROFILE: CS18
Size: 140mm
PROFILE: CS106
Size: 59mm
PROFILE: CS25
Size: 104mm
WHAT YOU WILL NEED TO
INSTALL CORNICES:
MITER BOX
SCRAPER
CORNICE GLUE
SILICONE GUN
OVER TRUSS/ RAFTER
One of the most cost-effective insulated ceilings is
to install IsoBoard as a roof-liner over trusses,
beams and rafters.
The board, in addition to providing high levels of
thermal insulation, provides a beautiful backdrop to
exposed trusses, and can be painted to match as
required.
NAIL UP CEILINGS
Can be retrofitted below an existing ceiling to cover
damage, provide insulation or change the
appearance. Isoboard can also be fixed below
concrete soffit.
BETWEEN TRUSS/RAFTER
The beauty of the timber can be exposed, whether
raw, treated or painted, with the thermal insulation
providing a supporting and accentuating backdrop as
well as proven and enduring thermal comfort. The
IsoBoard can also be painted or stained to match
each specific requirement.
INVERTED ROOF
Inverted roofs are designed with the waterproofing
layer, usually a liquid-applied membrane, beneath the
insulation. Insulation boards are loose-laid on top of
the membrane and then weighed down with paving
slabs or gravel ballast.
BETWEEN CAVITY WALL
Cavity wall insulation will prevent heat transfer and
build-up to the inner leaf of sun exposed walls.
UNDER SOFFIT
The requirement for insulation is met by fixing
IsoBoard to the under soffit surface of the slab as a
ceiling.
PERIMETER WALL
Isoboard is inserted against the foundations of the
building on the outside from the surface to the depth
of the foundation or 600mm, whichever is greater
UNDER FLOOR
Loss of heat through floors on concrete surface beds
is experienced as a cold underfoot condition,
particularly during winter when the supporting soils
cool down due to hygroscopic action of water.
WHAT YOU NEED TO
INSTALL ISOBOARD
DRYWALL
SCREWS
CEILING
CLIPS
STEEL OR TIMBER
BATTENS
WASHERS
CORNICE
GLUE
HOUSE PAINTS
Duram, Dulux, Plascon, Excelsior, Prodec.
Exterior/interior, wall & ceiling, primer, varnish, road marking.
ROOF PAINTS
Duram, Abe, Sika, Powafix.
Roof paint, waterproofing roofpaint with fibre reinforced and without,
acrylic waterproofing, hydroproof.
PAINT TINTING
Plascon and Duram paint tinting.
EXTRAS
Wood glue, epoxy adhesive, sealing/bonding, bonding agent, silicone,
contact glue, wood filler, paint tinter, lacquer thinners, mineral
turpentine, methylated spirits, spraypaint, lube spray, skim fix, crack
filler, sandpaper, paint brush, rollers, masking tape, scrapers.
CEILING & CORNICE SHOP
We offer a wide range of building material and decor
to suit all your renovation needs. We supply a wide
variety of paints, ceilings, plumbing and diy
products. We have our own professional in-house
paint doctor that will mix any colour you prefer using
a wide variety of colour charts.
CEILINGS
ALL ABOUT CORNICES
Cornices are the narrow mouldings that you see
capping the lines where the walls of a room meet
the ceiling. Traditionally, they were made from wood,
plaster,paper-covered plaster, polyurethane, and
nowadays, they are made from polystyrene.
Cornices and other mouldings were
made exclusively from wood, but polystyrene has
now emerged as a leading favourite because they
are cost effective and easy to install.
The fact that the installation of polystyrene
cornices it’s a really simple process is probably the
number one reason why they are so popular. Since
polystyrene cornices are installed using special
adhesive glue, they can be successfully mounted
onto a whole host of different surfaces, including
concrete, wood, face brick, marble, tile, vinyl, steel,
granite and plastic, to name just a few.
Polystyrene cornices have a smooth, white surface,
which merges exceptionally well with white ceilings.
To paint them, all you need to do is to apply a single
coat of white water-based paint. This is much
quicker and easier when compared to painting other
cornice materials, which often require an undercoat,
and then 2 to 3 coats of paint. To make it even
quicker, you can opt to spray paint a quick coat of
paint onto your polystyrene cornices.
ISOBOARD
Isoboard is a rigid, high density, extruded
polystyrene, manufactured in different thicknesses
and lengths to meet almost any building thermal
insulation requirements in the temperature range -
30°c to +60°c.
Thermal insulation provides a barrier to heat
transfer, which keeps heat energy on one side of the
board or the other. Isoboard can be painted with
water based paints when used in exposed
applications.
Exposed to fire, isoboard shrinks away from the
heat source. There are no flaming droplets, and no
flame spread. The gases released as a product of
combustion are less toxic than burning wood.
Isoboard thermal insulation is available in standard
lengths from 1.8m to 8m and in 600mm
increments. Thicknesses range from 30mm, 40mm,
50mm and 80mm.
PAINTS DEPARTMENT
In our paints department we don’t just stock paint,
we also mix any colour you would need for your diy
project. Interior and exterior paints, wall and ceiling,
enamel, varnish, road marking paint and roof paints
Home
About Us
Industrial Services
Contact Us
C e i l i n g s | C e i l i n g C o r n i c e s | I s o b o a r d | P a i n t s D e p a r t m e n t
CEILING & CORNICE SHOP
We offer a wide range of building material and decor to suit all your renovation needs. We supply a wide variety of paints, ceilings, plumbing and diy products.
We have our own professional in-house paint doctor that will mix any colour you prefer using a wide variety of colour charts.
PVC CEILINGS
10 in a pack
Insulation
Battens (spacing 300mm)
Drywall screws
Width: 300mm
Coverage: 11m²
CEILING TILES, ROSES & DADO RAILS
Ceiling Tiles: 50cmx50cm
8 in a pack (covers 2m²)
Ceiling Roses:
Various designs to choose from
Dado Rails: 2.4m lenghts
ISOBOARD
Thickness: 30mm, 40mm, 50mm
Stock Lengths: 2m, 2.4m, 2.7m, 3m, 3.6m, 4m,
4.8m, 5.4m, 6m, 7.2m, 8m.
80mm only available in 2m lenghts
Width: 600mm
Board Finish: plain/bevelled/isopine to be painted
with acrylic pva paint.
CEILINGS
RHINOBOARD
7mm, 9mm and 12mm
Rhinolite / Rhinoglide, fibre tape 45mm or 90mm,
tracks, studs, wall & ceiling channel, aluminium
skirting.
Moisture board 12mmx1.2x2.7/3/3.6m
Shera/Nutec boards 6mmx1.2x3m
Shera screws
Shutterply 18mmx1.2x2.4 (a grade/b grade)
TRAP DOORS
600mm x 600mm in width
INSULATION
Isotherm - 50mmx1.2 (12m²) 100mmx1.2 (7.2²)
Alucushion - 40mx1.2 (50m²)
Sisalation fr430 - 40mx1250 (50m²)
Ultra Sonic Batt (sound control) - 50mmx1195x595
(10 Batts in a pack)
Cavity Batt - 51mmx1.2x600 (40 batts)
63mmx1.2x600 (30 batts) 100mmx1.2x600 (20
batts)
Acoustic Batt - 51mmx1.2x600 (20 batts)
63mmx1.2x600 (16 batts) 100mmx1.2x600 (12
batts)
SUSPENDED CEILINGS
Cross Tee 1.2 (galv/white)
Main Tee 3.6 (galv/white)
Shadow Line 3.6 white (20x20)
White Vinyl Ceiling Tiles (9mm x 1.2 x 600)
Acoustic Tiles 1.2 x 600
Hanger Straps
BATTENS
Steel battens 3m
Steel battens 3.6m
Suspension brackets
Joiners for battens
Timber battens 38x38 (3m/3.6m/4.2m/4.8m/6m)
Timber rafters 38x114 (4.2m/6m)
Timber purlins 50x76 (3m/6m)
EXTRAS
Screws: drywall, jetting, chipboard, roofing screws,
wafer tek.
Nails: 3'', 4'', 5'', clout nails, 75mm steel nails, panel
pins, masonary nails, tite grip.
Corner bead 2.7m
Wall angle white 3.6m
Wall angle galv 20x20x3.6m
Wall angle galv 25x25x3.6m
Shadowline 30x30x3.6m
Glue: 280ml, 1kg, 2kg, 5kg
PROFILE: CS16
Size: 65mm
CORNICES
Here are 48 different cornice profiles to choose from.
PROFILE: XPS 008
Size: 100mm
PROFILE: XPS 009
Size: 50mm
PROFILE: XPS 006
Size: 40mm
PROFILE: CS41
Size: 105mm
PROFILE: XPS 004
Size: 62mm
PROFILE: XPS 005
Size: 95mm
PROFILE: CS05
Size: 105mm
PROFILE: CS20
Size: 107mm
PROFILE: CS45
Size: 175mm
PROFILE CS10
Size: 105mm
PROFILE: CS21
Size:135mm
PROFILE: XPS 001
Size: 130mm
PROFILE: CS42
Size: 110mm
PROFILE: CS43
SIZE: 120MM
PROFILE: XPS003
Size: 135mm
PROFILE: CS23
Size: 130MM
PROFILE: CS46
Size: 135mm
PROFILE: CS47
Size: 125mm
PROFILE: CS48
Size: 135mm
PROFILE: CS12
Size: 133mm
PROFILE: CUBA
Size: 72mm
PROFILE: COVE90
Size: 84mm
PROFILE: COVE80
Size: 80mm
PROFILE: CS08
Size: 120mm
PROFILE: COVE40
Size: 50mm
PROFILE: P6
Size: 135mm
PROFILE: CS44
Size: 140mm
PROFILE: P13
Size: 100mm
PROFILE: CS04
Size: 135mm
PROFILE: CS22
Size: 100mm
PROFILE: CS40
Size: 190mm
PROFILE: CS07
Size: 175mm
PROFILE: CS18
Size: 140mm
PROFILE: CS106
Size: 59mm
PROFILE: CS25
Size: 104mm
ALL ABOUT CORNICES
Cornices are the narrow mouldings that you see capping the lines where the walls of a room meet the ceiling. Traditionally, they were made from wood, plaster,
paper-covered plaster, polyurethane, and nowadays, they are made from polystyrene. Cornices and other mouldings were made exclusively from wood,
but polystyrene has now emerged as a leading favourite because they are cost effective and easy to install.
The fact that the installation of polystyrene cornices is a really simple process it’s probably the number one reason why they are so popular. Since polystyrene
cornices are installed using special adhesive glue, they can be successfully mounted onto a whole host of different surfaces, including
concrete, wood, face brick, marble, tile, vinyl, steel, granite and plastic, to name just a few.
Polystyrene cornices have a smooth, white surface, which merges exceptionally well with white ceilings. To paint them, all you need to do is to apply a single
coat of white water-based paint. This is much quicker and easier when compared to painting other cornice materials, which often require an undercoat,
and then 2 to 3 coats of paint. To make it even quicker, you can opt to spray paint a quick coat of paint onto your polystyrene cornices.
WHAT YOU WILL NEED TO INSTALL CORNICES:
MITER BOX
SCRAPER
CORNICE GLUE
SILICONE GUN
OVER TRUSS/ RAFTER
One of the most cost-effective insulated ceilings is
to install IsoBoard as a roof-liner over trusses,
beams and rafters.
The board, in addition to providing high levels of
thermal insulation, provides a beautiful backdrop to
exposed trusses, and can be painted to match as
required.
NAIL UP CEILINGS
Can be retrofitted below an existing ceiling to cover
damage, provide insulation or change the
appearance. Isoboard can also be fixed below
concrete soffit.
BETWEEN TRUSS/RAFTER
The beauty of the timber can be exposed, whether
raw, treated or painted, with the thermal insulation
providing a supporting and accentuating backdrop as
well as proven and enduring thermal comfort. The
IsoBoard can also be painted or stained to match
each specific requirement.
ISOBOARD
Isoboard is a rigid, high density, extruded polystyrene, manufactured in different thicknesses and lengths to meet almost any building thermal insulation
requirements in the temperature range -30°c to +60°c.
Thermal insulation provides a barrier to heat transfer, which keeps heat energy on one side of the board or the other. Isoboard can be painted with water
based paints when used in exposed applications.
Exposed to fire, isoboard shrinks away from the heat source. There are no flaming droplets, and no flame spread. The gases released as a product of combustion
are less toxic than burning wood. Isoboard thermal insulation is available in standard lengths from 1.8m to 8m and in 600mm increments.
Thicknesses range from 30mm, 40mm, 50mm and 80mm.
INVERTED ROOF
Inverted roofs are designed with the waterproofing
layer, usually a liquid-applied membrane, beneath the
insulation. Insulation boards are loose-laid on top of
the membrane and then weighed down with paving
slabs or gravel ballast.
BETWEEN CAVITY WALL
Cavity wall insulation will prevent heat transfer and
build-up to the inner leaf of sun exposed walls.
UNDER SOFFIT
The requirement for insulation is met by fixing
IsoBoard to the under soffit surface of the slab as a
ceiling.
PERIMETER WALL
Isoboard is inserted against the foundations of the
building on the outside from the surface to the depth
of the foundation or 600mm, whichever is greater.
UNDER FLOOR
Loss of heat through floors on concrete surface beds
is experienced as a cold underfoot condition,
particularly during winter when the supporting soils
cool down due to hygroscopic action of water.
WHAT YOU NEED TO INSTALL ISOBOARD
DRYWALL
SCREWS
CEILING
CLIPS
STEEL OR TIMBER
BATTENS
WASHERS
CORNICE
GLUE
HOUSE PAINTS
Duram, Dulux, Plascon, Excelsior, Prodec.
Exterior/interior, wall & ceiling, primer, varnish, road marking.
PAINTS DEPARTMENT
In our paints department we don’t just stock paint, we also mix any colour you would need for your diy project. Interior and exterior paints,
wall and ceiling, enamel, varnish, road marking paint and roof paints
ROOF PAINTS
Duram, Abe, Sika, Powafix.
Roof paint, waterproofing roofpaint with fibre reinforced and without,
acrylic waterproofing, hydroproof.
PAINT TINTING
Plascon and Duram paint tinting.
EXTRAS
Wood glue, epoxy adhesive, sealing/bonding, bonding agent, silicone,
contact glue, wood filler, paint tinter, lacquer thinners, mineral
turpentine, methylated spirits, spraypaint, lube spray, skim fix, crack
filler, sandpaper, paint brush, rollers, masking tape, scrapers.
039 976 0065
“Specialists in all Construction Services”
Cell: 082 467 5667
Tel: 039 976 0065
Quick Links
Home
About Us
Industrial Services
Contact Us
